- FOUND: but center console back together no hardware to bolt back up but it's set in place. Can not wire in parking lights to come on in drive is controlled through the TIPM Toyally integrated power module Tested circuits at tail lights and have no power to any of the lights. Will need additional time to remove the tipm module and test the circuits between the tipm module and the rear tail light assemblies
- additional time / remove the tipm module and test the circuits between the tipm module and the rear tail light assemblies. Trace wiring harness to connector c200 in the upper right corner of the dash. Found this cure nectar was creating an open circuit as it was not properly connected in latched. After properly securing connector, rear tail light turn signal stop light and backup light functions are all working.
DAVID T. gave our service a 5 star review on 8/7/2021